robust and reliable combined UV-A and Lux-Meter, that measures simultaniously UV-A-Radiation and the Illuminance of the visible light.
Designed to NDT-Applications and Industrial Use
UVA-Sensor: 0-100mW/cm² (0- 100,000 µW/cm²)
Visible Sensor: 0-5,300Lux (0-500 fc)
Blacklight Function for easy Reading in Dark Conditions
Set with Read-Out-Unit XR-1000, Dual-Sensor XDS-1000, case and USB-cable
Advanced Digital Radiometer/Photometer Kit
Single detector with dual sensors measures both ultraviolet and visible light.
Complies with MIL and ASTM specifications for MPI and FPI.
Specially Engineered for NDT Applications
• Microprocessor-controlled readout unit with dual-wavelength sensor detector
• Superior bandpass interference filter
• Choice of direct or USB connection between sensor detector and readout unit
• Excellent cosine response
• User-defined power save and automatic shutoff
• Large, easy-to-read LCD screen
• Sealed sensor housing and USB connection with water-resistant adapter
The AccuMAX™ XRP-3000 radiometer/photometer kit uses a dualwavelength
UV-A/VIS sensor detector to measure both ultraviolet and
visible light. Featuring automatic zeroing, integration and signal hold, the
unit provides accurate readouts for UV, visible irradiance or radiance.
The LCD readout features ±0.2% linearity with the sensor sending the
linearity correction data to the readout unit during initial power up. To
ensure consistent results, sensors are designed with superior bandpass
filters while optical stacks are assembled in Class 100 clean workstations.
For precise spectral coverage, high-quality interference filters are used to
The rugged meter housing features a removable, rubber protective boot for
better grip and to help prevent accidental breakage. It also provides superior
protection against moisture contamination, shock and humidity. In addition,
the XRP-3000 features a liquid- and water-resistant, sealed sensor
housing with a special self-sealing ring to help eliminate light leakage.
The XRP-3000 meter’s microprocessor is the heart of its simplicity. Just
four pressure-sensitive buttons on the readout unit’s membrane keypad
offer an extensive array of advanced functions. For example, to subtract
ambient light, the user need only press the “ZERO” button. This activates
autozeroing, sets the value to 0 and displays relative readings of subsequent
measurements. “HOLD” freezes the display thus obtained, while
“INTG” displays the average UV intensity after integrating the UV
energy over time. These functions and other user-selectable parameters
are easily accessible through the software’s main and sub menus.
The XRP-3000 radiometer is carefully quality-controlled to ensure that
each unit has up-to-date calibration and meets stringent measurement
requirements. Housed in a durable polycarbonate case, it features dependable
solid-state electro-optical circuitry for long, trouble-free operation.
The XRP-3000 is compact, lightweight and battery-operated for
convenient use in the factory, field or any other location where measurements
need to be taken. A slide-out panel allows for easy replacement
of the unit’s 9-volt batteries.
The XRP-3000 offers extreme flexibility in the workplace. For technicians
performing radiographic examinations, the XS-555/L luminance sensor
detector is available as an accessory to provide film viewer output
measurements in cd/m2, cd/ft2 or fL.
Allows Direct or USB Cable Detector Connection
Readout Unit (XR-1000)
Resolution 4-digit autoranging display
Screen 128 x 64 dot pixel chip on glass
STN transmissive monochrome
LCD—2.8 in (7.1 cm) diagonal
Sampling Rate 7.5 Hz (single sensor)
15 Hz (dual sensor)
Read Update 2 Hz
Overall Accuracy Better than ±5% with reference
to NIST standards
Temperature Coefficient ±0.025%/°C (0 to 50°C)
Dual UV-A/Visible Sensor Detector (XDS-1000)
• UV-A Sensor 0–100 mW/cm2
• Visible Sensor 0–5,300 lux (0-500 fc)
Battery Operation Two non-rechargeable 9V alkaline
battery cells are included as standard
• Length 7.75 in (19.7 cm)
• Width 4.25 in (10.8 cm)
• Thickness 1.25 in (3.2 cm)
• Weight 0.8 lb (360 g)
• Length 4.75 in (12.1 cm)
• Width 2.0 in (5.1 cm)
• Thickness 7/8 in (2.2 cm)
• Weight 0.22 lb (100 g)
USB Cable 5 ft (1.5 m)
• Water-resistant USB
cable with adapter XCB-100
• Rubber boot XRB-100
• Carrying case XCC-100